The EPE Bladder Accumulator comprises a steel shell in which is fitted a bladder complete with a gas valve and fluid port with the
poppet valve :
• The shell is a pressure vessel forged or fabricated from high grade steel designed and manufactured to meet the relevant
international standards. For special applications various surface coatings are available as well as a stainless steel construction.
• The bladder, which separates the gas from the liquid, is made in nitrile rubber in the standard version.
Bladders in butyl, neoprene, ethylene-propylene etc. are available for special uses. The main feature of the EPE bladder,
which makes it unique, is the special manufacturing process thanks to which it is produced in one single piece without
joints, even in the larger sizes, so as to avoid all the problems which poor gluing may involve. Another advantage of
the EPE bladder is the gas valve which, not being vulcanised to the bladder, can be fit to it and removed simply and
safely. For this reason the same bladder can be supplied with gas valve in different versions, or the valve can be
reused, thus reducing the cost of spare parts.
• The gas valve is connected to the bladder by a rubber coated washer to ensure a gas tight joint and a non return valve
is incorporated for bladder inflation. The bladder, complete with the gas valve, is fixed to the accumulator shell by a lock
nut, and the assembly is protected by a cover.
• The fluid port valve prevents the bladder from extruding into the fluid port and, at the same time, allows the liquid
to flow. In the high pressure range is used a poppet valve, while in the low pressure range is used a drilled disc.
In the latter case the precharge pressure should not exceed 15 bar.

Brochure:

Bladder Accumulators